Installation; Chassis Placement - Pacific AMX series Operation Manual

3.0

INSTALLATION

This section describes the installation of the AMX-Series AC Power Source.
3.1

CHASSIS PLACEMENT

The AMX-Series Power Source is designed to fit into the standard 19 inch rack. Provisions for mounting slide
rails are included in the chassis. The chassis can also be used as a bench-top unit, if desired.
•
•
IT IS THE CUSTOMER'S RESPONSIBILITY TO ENSURE THAT UNITS ARE
ADEQUATELY PACKAGED WHEN THEY ARE MOVED TO A DIFFERENT
LOCATION. THE UNITS SHOULD ALWAYS BE PACKAGED IN THE
ORIGINAL SHIPPING CONTAINER WHEN MOVED OR RETURNED TO THE
FACTORY FOR SERVICE. INADEQUATE PACKAGING WILL RESULT IN
CHASSIS DAMAGE--INCURRING NON-WARRANTY SERVICE COSTS.
SECTION 3
INSTALLATION
* * * W A R N I N G * * *
THE AMX-SERIES CHASSIS IS HEAVY !
(VARIOUS MODELS WEIGH APPROX 50-180 lbs PER ASSY)
USE EXTREME CARE WHEN MOVING THE UNIT.
THE MAGNETICS MODULE, MODELS 125-AMX, 140-AMX, 160-AMX,
AND 320-AMX THROUGH 3120-AMX ARE NOT A ONE-PERSON LIFT.
UNIT MUST BE LIFTED BY TWO OR MORE INDIVIDUALS
IN ORDER TO REDUCE CHANCE OF PHYSICAL INJURY.
* * * W A R N I N G * * *
- - - - - - - - P A C K I N G N O T I C E - - - - - -
- - - - - - - - P A C K I N G N O T I C E - - - - - -
39