Https Example - ZyXEL Communications NWA5121-N User Manual

The following table describes the labels in this screen.
Table 61 Configuration > System > WWW > Service Control
LABEL
HTTPS
Enable
Server Port
Authenticate Client
Certificates
Server Certificate
Redirect HTTP to
HTTPS
HTTP
Enable
Server Port
Apply
Reset

13.4.5 HTTPS Example

If you haven't changed the default HTTPS port on the NWA, then in your browser enter "https://
NWA IP Address/" as the web site address where "NWA IP Address" is the IP address or domain
name of the NWA you wish to access.
13.4.5.1 Internet Explorer Warning Messages
When you attempt to access the NWA HTTPS server, you will see the error message shown in the
following screen.
Chapter 13 System
DESCRIPTION
Select the check box to allow or disallow the computer with the IP address that
matches the IP address(es) in the Service Control table to access the NWA Web
Configurator using secure HTTPs connections.
The HTTPS server listens on port 443 by default. If you change the HTTPS server port
to a different number on the NWA, for example 8443, then you must notify people
who need to access the NWA Web Configurator to use "https://NWA IP
Address:8443" as the URL.
Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself to the NWA by sending the NWA a certificate. To do that the SSL
client must have a CA-signed certificate from a CA that has been imported as a
trusted CA on the NWA.
Select a certificate the HTTPS server (the NWA) uses to authenticate itself to the
HTTPS client. You must have certificates already configured in the My Certificates
screen.
To allow only secure Web Configurator access, select this to redirect all HTTP
connection requests to the HTTPS server.
Select the check box to allow or disallow the computer with the IP address that
matches the IP address(es) in the Service Control table to access the NWA Web
Configurator using HTTP connections.
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service to access the NWA.
Click Apply to save your changes back to the NWA.
Click Reset to return the screen to its last-saved settings.
NWA5120 Series User's Guide
124