Dcs - ZyXEL Communications NWA5121-N User Manual

Chapter 7 Wireless
Figure 39 Kicking a Connection
Connections are kicked based on either idle timeout or signal strength. The NWA first looks to
see which devices have been idle the longest, then starts kicking them in order of highest idle time.
If no connections are idle, the next criteria the NWA analyzes is signal strength. Devices with the
weakest signal strength are kicked first.

7.5 DCS

Use this screen to configure dynamic radio channel selection. Click Configuration > Wireless >
DCS to access this screen.
NWA5120 Series User's Guide
64