The Current Time and Current Date fields will display the appropriate settings if the
synchronization is successful.
If the synchronization was not successful, a log displays in the View Log screen. Try re-configuring
the Date/Time screen.
To manually set the NWA date and time:
Click System > Date/Time.
1
Select Manual under Time and Date Setup.
2
Enter the NWA's time in the New Time field.
3
Enter the NWA's date in the New Date field.
4
Under Time Zone Setup, select your Time Zone from the list.
5
As an option you can select the Enable Daylight Saving check box to adjust the NWA clock for
6
daylight savings.
Click Apply.
7
To get the NWA date and time from a time server:
Click System > Date/Time.
1
Select Get from Time Server under Time and Date Setup.
2
Under Time Zone Setup, select your Time Zone from the list.
3
Under Time and Date Setup, enter a Time Server Address.
4
Click Apply.
5
13.4 WWW Overview
The following figure shows secure and insecure management of the NWA coming in from the WAN.
HTTPS and SSH access are secure. HTTP, Telnet, and FTP management access are not secure.
Chapter 13 System
NWA5120 Series User's Guide
121