Download Print this page

Wirepath Surveillance WPS-DVR User Manual

Wirepath surveillance wps-dvr; wps-dvr-hd remote viewing with an iphone, ipad, ipod touch

Advertisement

Quick Links

REMOTE VIEWING
WITH AN
1. INSTALL THE APPLICATION
1. Access the App Store
iTunes
or your Apple
®
for WPS-DVR (WPS-DVR-HD for iPad
2. Install and run WPS-DVR or WPS-DVR-HD
on your Apple Device.
2. ADD THE DVR IN THE DEVICE LIST
1. Select the Add button to add the
DVR to the Device List.
2. Enter a name for the DVR in Device Name.
3. Enter the DVR's IP address or DDNS name
in Address.
• If connecting on a local network,
enter the IP address (Ex: 192.168.0.101).
• If using DDNS, enter the registered domain
name (such as smithdvr.dyndns.com).
Note: Do not precede the address with
"http://" or add a port number to the
end of the address.
4. Enter the Control Port and Data Port numbers
that match the settings of the DVR and the
router that the DVR is connected to. By default,
these numbers are 67 and 68 respectively.
5. Enter the User Name and Password for the
DVR. By default, these settings are user and
1234 respectively.
6. Select Extra to connect to the DVR's Extra
network stream or select Record to view the
Main stream. When Extra is selected, the
resolution of the live stream being viewed will be
determined by the Video Stream setting in the
Network Menu. When Record is selected, the
resolution of the stream will match that of the
Best REC Resolution set in the Pre-Camera
Menu. The Record setting offers the most
resolution but requires a high-speed network
connection. The Extra setting will improve
the speed of the video but at a lower resolution.
7. If enabled, Auto Connect will establish a
connection with the DVR as soon as the
application is opened.
8. Select the OK button once settings are complete.
Recommendation: Enter two devices per DVR to the
Device List. One could be named "Local" and the
second "Remote." When the user is connected to the
same local network as the DVR and selects "Local,"
the user will experience faster network speed. When
connected to a remote network, the user should select
"Remote" to still have access to the DVR.
© 2011 Wirepath Surveillance
iPhone
iPad
,
®
using
SM
Device and search
®
®
iPod touch
, OR
®
).
WPS-DVR
1 of 3
®
WPS-DVR-HD
110825

Advertisement

loading

Summary of Contents for Wirepath Surveillance WPS-DVR

  • Page 1 Device and search ® ® for WPS-DVR (WPS-DVR-HD for iPad ® 2. Install and run WPS-DVR or WPS-DVR-HD on your Apple Device. 2. ADD THE DVR IN THE DEVICE LIST WPS-DVR WPS-DVR-HD 1. Select the Add button to add the DVR to the Device List.
  • Page 2 REMOTE DISPLAY AND OPERATION After launching WPS-DVR or WPS-DVR-HD, select the DVR in the Device list to connect. The application will open to a 4 window split screen by default. Use the CH button or double-tap a quadrant in the split screen to view a single camera full screen.
  • Page 3 Alarm Output(s) of the connected DVR. • PLAYBACK OPERATION Fast Reverse Fast Forward Single Step Play / Pause Stop Playback function menus are split across two pages. Press these buttons to scroll to the next function menu. 3 of 3 © 2011 Wirepath Surveillance...

This manual is also suitable for:

Wps-dvr-hd