Table of Contents
Advertisement
General roX 6.0 functions
setting the trip climb or descent
Mode 2
Set
Mode 1
Reset
www.sigmasport.com
6
Press the
button to start and stop the countdown.
Set
If the countdown is running, the icon
The icon flashes once the countdown has reached zero.
7
resetting the countdown to the configured start value:
Press and hold the
5.8 Setting the trip climb or descent
The trip ascent (+) and descent (-) are separately displayed.
switch between trip ascent (+) and descent (-) as follows:
1
Press the
button to switch to Trip climb.
Mode 1
2
Press and hold the
on the display.
3
Press
to switch the display to Trip climb (+) or Descent (-).
Mode 2
4
Press the
button to save your setting.
Set
"set oK" appears on the display.
5.9 Resetting trip data
1
Press and hold the
2
"Trip data reseT" flashes on the display.
use this function to reset the following values to zero:
Trip distance, ride time, ∅ speed, max. speed, ∅ cadence, altitude +/-, altitude
profile, max. altitude, lap distance, lap time, intensity zones, ∅ heart rate, max.
heart rate, calories.
5.10 Total values for bike 1 and bike 2
If you only use the roX 6.0 on one bike, only the total values for the first bike will
be displayed.
If you also use a second bike, the total values are displayed under "bike 1",
"bike 2" and "bike 1+2".
5.11 Service interval
The optional service interval notifies you once a set distance has been ridden.
The service interval is an on screen reminder for regular bike maintenance. The
service interval can only be set with a universal Fast setting box (uFsb) at your
local bike shop. once the preset distance has been reached 'Inspection' appears
on the display. Press any button to clear this message.
Note:
The service Interval default is oFF
roX 6.0
appears on the display.
button for three seconds.
Reset
button for three seconds. "Trip climb/Desc" flashes
Set
button for more than three seconds.
Reset
ROX 6.0
Page 28
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
