Displaying The Intensity Zones In Normal Mode; Setting The Total Distance For Bike 1 Or Bike 2; Setting The Total Trip Time For Bike 1 Or Bike 2 - Sigma Rox 6.0 User Manual

basic settings

setting the total distance for bike 1 or bike 2

Reset Mode 2
Set Mode 1
Reset Mode 2
Set Mode 1
www.sigmasport.com

4.14.1 Displaying the intensity zones in normal mode

you can also obtain a graphical image of the area in which you are currently
training:
1 In normal mode, press
2 The four intensity zones are graphically displayed in the bottom display
segment.
3 An arrow shows you which zone you are currently training in.
4.15 Setting the total distance for bike 1 or bike 2
you can use this option to enter existing values (e.g. transferred from your old
device). new values are then added to these.
1 Press the button to switch to the total distance for bike 1 or bike 2.
Mode 1
2 Press the button. The first digit for entry flashes.
Set
3 Press or
Mode 2 Reset
4 Press the button to switch to the next digit.
Mode 1
5 Press the button to save your setting.
Set
"set oK" appears on the display.
Important Note:
00.080 mi is equivalent to 80 miles.

4.16 Setting the total trip time for bike 1 or bike 2

you can use this option to enter existing values (e.g. transferred from your old
device). new values are then added to these.
1 Press the button to switch to the total trip time for bike 1 or bike 2.
Mode 1
2 Press the button. The first digit for entering the hours value flashes.
Set
3 Press or
Mode 2 Reset
4 Press the button to switch to the next digit.
Mode 1
5 Press the button to save your setting. The minutes value flashes.
Set
roX 6.0
to switch to the intensity zones screen.
Mode 2
to increase or decrease the value respectively.
to increase or decrease the value respectively.
ROX 6.0
Page 22