Activating The Zone Alarm; Setting The Contrast; Exiting The Basic Settings - Sigma Rox 6.0 User Manual

basic settings

Activating the zone alarm

Reset Mode 2
Set Mode 1
Reset Mode 2
Set Mode 1
Set
www.sigmasport.com
4.22 Activating the zone alarm
1 Press the button to switch to the zone alarm.
Mode 1
2 Press the button. The current setting flashes.
Set
3 Press or
Mode 2 Reset
4 Press the button to save your setting.
Set
"set oK" appears on the display.
Note
The zone alarm beeps during your ride if you are outside the limits of the selected
training zone.

4.23 Setting the contrast

1 Press the button to switch to the preset contrast.
Mode 1
2 Press the button. The display flashes.
Set
3 Press or
Mode 2 Reset
(1=weak/3=strong)
4 Press the button to save your setting.
Set
"set oK" appears on the display.

4.24 Exiting the basic settings

Press and hold the
Set
"setting cLose" flashes on the display.
roX 6.0
to switch the zone alarm on or off respectively.
to increase or decrease the value respectively.
button for three seconds to exit the basic settings.
ROX 6.0
Page 25