Operating Instructions; Power Connection; Battery Backup - Electrohome EAAC200 User Manual

POWER CONNECTION

1. Plug the ac power cord into a household ac outlet.
2. clock display will flash 12:00 until set to correct time.

BATTERY BACKUP

this alarm clock is equipped with an optional battery backup feature. this will
restore your alarm clock settings in the event of a power outage.
installing the batteries (not included)
1. open the battery compartment on the bottom of the alarm clock by
pushing on the latch and pulling the door open.
2. install 2 x aa batteries ensuring that the battery polarity corresponds to
the polarity in the battery compartment.
3. close the battery compartment cover.
note:
• batteries must be installed by an adult.
• use only the recommended size and type of battery specified.
• Please be sure to follow the correct polarity when installing the battery in the battery
compartment. a reversed battery may cause damage to the alarm clock.
• do not mix different types of batteries or mix new and used batteries.
• When not using the unit for a prolonged period of time, please remove the batteries to
avoid possible damage caused by leaking batteries.

OPERATING INSTRUCTIONS

- 11 -