Operating Instructions; Connecting Power; Battery Backup - Electrohome EAAC470 User Manual

CONNECTING POWER

The USB Charging Alarm Clock Radio is equipped with an "AUTO TIME SET" feature.
When power is connected, the clock display will flash '2' which is TIME ZONE 2
(Eastern time) and the default TIME ZONE setting. The correct time will be displayed,
unless you are in another time zone.
To select TIME ZONE 2 (Eastern time) as your default time zone:
• Press ONCE to confirm your selection.
To change your time zone upon setup:
• Press /
ONCE to confirm your selection.
To change your time zone after setup:
• Press and hold the TIME ZONE/SNOOZE/SLEEP/DIMMER button until numbers flash.
/
• Press
ONCE to confirm your selection.
There are 8 programmed times zones:
Zone 0 - Newfoundland time
Zone 1 - Atlantic time
Zone 2 - Eastern time (default)

BATTERY BACKUP

This alarm clock is equipped with a battery backup feature. This feature will restore your
alarm clock settings in the event of a power outage. The 3V, CR2032 Flat Lithium battery
is pre-installed at the factory, however, should you need to replace the battery, please
read the following instructions.

OPERATING INSTRUCTIONS

DST/°C °F until your own time zone appears on the display; press
DST/°C °F until your own time zone appears on the display; press
Zone 3 - Central time
Zone 4 - Mountain time
Zone 5 - Pacific time
- 12 -
Zone 6 - Alaska time
Zone 7 - Hawaiian time