Operating Instructions; Power Connection; Dst - Daylight Savings Time; Reset - Electrohome EAAC600 User Manual

PACKAGING CONTENTS
• Projection Dual Alarm Clock Radio with Auto Time Set
• backup battery "CR2032"
• Instructional Manual
ATTENTION
1. Do not plug or unplug the power cable if you have wet hands.
2. If you are not planning to use the unit for an extended period of time, disconnect
the power cable from the wall outlet.
3. When disconnecting the power cord from the wall outlet. In order to avoid
damage to the power cord and electric shock, do not pull on the cord; pull firmly
at the base of the plug.

POWER CONNECTION

1. Plug the AC power cord into a household AC outlet.
2. Clock display will flash "3" indefinitely.
3. Unit will go to zone 3, which is the default setting, and correct time will
be displayed.
SETTING THE TIME ZONE (FACTORY PRESET TO ZONE "3"- EST)
Press the >> / YEAR / DST(18) or << / MONTH - DAY (17) to select time zone 1-6.
Press MODE (19) to confirm when the correct time zone appears on the display.
zone 1 Newfoundland
zone 2 Atlantic time
zone 3 Eastern time
Reset the time zone:
Press SNOOzE/SLEEP/TIME zONE(3) and hold for 3 seconds to change the time zone
when you are in different location.
SETTING DST – Daylight Savings Time
Press >> / YEAR / DST (18) and hold for 3 seconds to toggle on and off the
DST function.

RESET

The RESET(9) is located on the back of unit. Use a ballpoint pen to press it whenever
you change the batteries, or unit is not performing as expected. This will return all
settings to default value, you will lose any stored data (alarm and clock settings).
PRODUCT INFORMATION

OPERATING INSTRUCTIONS

zone 4 Central time
zone 5 Mountain time
zone 6 Pacific time
- 8 -