Procedure Of Scan To E-Mail - Oki MC352 Startup Manual

Scanning to E-mail
15
Press the and then enter the
information in B-6.
16
Select [Enter] and then press
Proceed to step 21.
17
Press the and then enter the
information in B-7.
18
Select [Enter] and then press
19
Press the and then enter the
information in B-8.
20
4
Select [Enter] and then press
21
When the setup menu screen is
displayed, press .
22
For the confirmation message, check
that [Yes] is selected and press
The setup for Scan to E-mail is complete.

Procedure of Scan to E-mail

This section explains how to start Scan to
.
OK E-mail. The following procedure uses the direct
input method for specifying a destination.
You need to configure the initial network and
e-mail settings before using the Scan to E-mail
function.
.
Memo
OK
● The following procedure uses the factory default settings.
1
Press the <SCAN> key on the operator
panel.
.
OK
2
Place your document in the ADF or on
the document glass as below:
.
OK
● ADF
Load documents face up with the top edge of the
documents in first.
Adjust the document guides to the width of your
documents.
- 56 -