Step 2 Connecting A Telephone Line; Connecting To A Public Line (Connecting For Fax Only) - Oki MC352 Startup Manual

Initial Setup for Faxing
5
Press the to select [Fax Setup] and
then press
OK
6
Press the to select [Fax Setting] and
then press
OK
7
Press the to select [Country Code]
and then press
8
Press the or
3
name and then press
If your country name is not displayed, select the
following value.
- If your country is the Czech Republic or
Slovakia, select [Czech/Slovakia].
- If your country is Canada, select [U.S.A].
- If the region of your country is Latin
America, select [Latin America].
- If the region of your country is Europe or
the Middle East, select [International].
Settable Country Codes:
U.S.A. International
Ireland Norway
Denmark Germany
Czech/Slovakia
Austria Belgium
Portugal Spain
Australia New Zealand
Hong Kong Latin America
China Russia
Thailand Malaysia
Brazil South Africa
Turkey Ukraine
9
For the confirmation message, check
that [Yes] is selected and press
The machine restarts automatically, and the
default screen is displayed a few minutes later.
Memo
● If the [Country Code] is changed, the value of [PBX
Line] and [MF (Tone)/DP (Pulse)] are changed to the
default values for each country code.
.
.
.
OK
to select your country
.
OK
United Kingdom
Sweden Finland
Hungary
Poland Switzerland
Netherlands France
Italy Greece
Singapore
Mexico
Taiwan Japan Korea
Jordan Argentina
Belarus Moldova
OK
Step 2 Connecting a
Telephone Line
This section explains how to connect a telephone
line for faxing. Be sure to connect the telephone
line depending on your environment before you
transmit or receive faxes.
The method of connecting a telephone line
differs depending on your environment. Based
on the following figures, connect the line for
your environment.
Note
● Do not connect with USB cable or LAN cable at this point.
● Be sure to set the appropriate country code before
connecting the telephone line.
● You cannot connect to an ISDN line directly. To connect to
an ISDN line, use the terminal adopter (TA) and connect
to the LINE connection of the machine.
● A telephone cable is supplied with your machine except in
certain countries.
Reference
● To check the reception mode according to the machine
environment, refer to
Mode" P.36.
● To check the dial type settings, refer to
for Each Dialing Type"
Connecting to a Public Line
(Connecting for Fax Only)
Note
● Do not connect with USB cable or LAN cable at this point.
1
Check that the machine is turned off.
If the machine is turned on, hold down the power
switch for approximately one second to turn off
the power.
.
- 26 -
"Step 3-6 Specifying Reception
"Step 3-1 Settings
P.30.