Basic; System Setup - Honeywell VISTA CADVR-1004C User Manual

IV. DISK: Display the HDD state and format the HDD.
V. INFORMATION: Display of the current configuration parameter, you can check:
system information, network information, user information and video settings information.
VI. MAINTENANCE: Firmware can be upgraded; the frequency and schedule of
upgrading can be setup.
VII. LOGOUT: Locks the front panel button, and user name and password need to be
input while re-login.

3.1 BASIC

After enter the menu, move the cursor to "BASIC", and the icon will be highlighted, click to
enter.

3.1.1 System setup

To setup of device name, device ID, video format, VGA resolution, language, logout time and
startup wizard.

Device name: It is for the change of the device name, click the input box and keyboard
will pop-up, and click the keyboard to edit the device name.

Device ID: It is for the change of device ID, click the input box and keyboard will be
pop-up, and click the keyboard to edit the device name.

Select "PAL" or "NTSC" from the drop-down box.

VGA resolution: Adjust according to the VGA used. Select "1024×768" or "1280×1024"
from the drop-down box.

Language: Select the language from the drop-down box.

Logout time: Select between 30 seconds, 1 minute, 3 minutes, 5 minutes, 10 minutes to
Never.

Startup wizard: Select "Off" or "On" from the drop-down box.
Note: After setup is completed, click "Apply" to save the setup, and click "Default" to
18