2. SYSTEM STARTUP
SYSTEM STARTUP
Power on/off
Connect the power plug to the power port on the back of the DVR. The system will
automatically run a status check, and will start after few seconds. You will see a wizard
interface after the system loading.
SETUP WIZARD
Setup Wizard is a quick-set to enter the whole CMS. You can finish the DVR basic settings
according to your requirements. This setup wizard contains all the basic settings, like time
setup, network setup, HDD format reminder, etc. The DVR will achieve basic functions after
the setup wizard has finished. If personalized settings are desired, please login to the main
menu and setup to complete this function.
2.1 Wizard interface
Wizard interface is shown below. We recommend the initial user finish the guide step by step
for the basic settings. Place a check mark '√' in the box in the lower left corner and then click
'Next' to perform the basic settings.
2.2 Administrator Login Interface
Here we recommend you setup a password for administrator and then click "Next" for more
settings; if you click "Cancel", you will enter directly into the "Main Menu"; if you click "Prev.",
the system goes to the previous page.
Note: By default, the administrator user name is: admin. There is no password, but for better
security, we strongly recommend that you setup a password here.
10