Honeywell VISTA CADVR-1004C User Manual page 33

mask correctly.

Obtain DNS server address automatically

Use the following DNS sever addresses:
Preferred DNS server: fill in the DNS you get from your Internet Service Provider (ISP).
Alternate DNS server: fill in the DNS you get from your Internet Service Provider (ISP).
Attention: Click "Apply" after setup.
PPPoE

PPPoE: Enable the PPPoE

Fill the user name and password of your PPPOE which is provided by your Internet
Service Provider (ISP). The system will restart after clicking OK. If the user name and
password are correct, the system will connect to the network via the PPPOE. And the IP
address will be filled automatically. Note: Click "Apply" after setup.
33