Canon VB-H43 Operation Manual page 138

Changing the Camera Zoom Ratio
Move the knob on the slider up or down to zoom in or out
The camera zoom ratio will change according to the knob
position on the slider. The knob can also be moved by
clicking on an empty part of the slider.
Note
• If [Digital Zoom] is set to [Enable] in [Camera] on the Setting
page, the icon for the digital zoom telephoto end is displayed.
(p. 55).
• In the Admin Viewer, you can also control the zoom with the
Camera Control button (p. 145).
Change the Zoom Ratio in the Panorama
Display Area
Click the [Panorama Display] button.
1
Change the zoom ratio in the panorama display area
2
displayed.
You can change the zoom ratio by dragging the yellow
frame lines in the panorama window and changing the
size of the frame. The zoom ratio will adjust to capture
the area in the changed frame.
138
Maximum telephoto digital
zoom
(only when digital
zoom is on)
Optical telephoto end
Slider for zoom
Move the knob upwards to
zoom in (telephoto)
Move the knob downwards
to zoom out (wide-angle)
Wide end
Using the Preset/Home Position
You can control the camera using presets and home
position registered in the camera beforehand (p. 100).
Click the preset selection box and select a preset from the
displayed list to go to the selected preset camera angle.
Click the [Home Position] button to move the camera
angle to the home position.
Preset selection box
Note
Register presets and home position beforehand using the Preset
Setting Tool (p. 102). Registered presets will appear in the preset
selection box.
Compensating Backlight
This control is effective when the image is dark due to
backlight.
Clicking [BLC] brightens images that are dark due to
backlight.
Clicking the button again cancels backlight
compensation.
Important
• The [BLC] button is not available if [Smart Shade Control] is
set to [Auto].
• The [BLC] button is not available if [Exposure] is set to
[Manual].
[Home Position] button