• If the subject looks greenish under mercury lamps in the
[Auto] mode, select the [Mercury Lamp] mode under light
source. If the image is still not shown in appropriate colors
under mercury lamps when the [Mercury Lamp] mode is
selected under light source, use [One-shot WB].
• When the subject has only one color, under low light
conditions, or when sodium lamps, mercury lamps or certain
other fluorescent lighting is used, colors may not be adjusted
automatically.
• When [Day/Night] is set to [Night Mode] (including when it is
set to [Auto] and night mode is judged to be applicable), the
white balance function cannot be used.
• Notes on capturing video continuously day and night
If a subject that seldom changes is captured in a location
where the light source changes gradually, such as when
capturing a subject continuously day and night, appropriate
colors may not be achieved.
In the above case, applying changes to the image to capture
will achieve the appropriate colors.
Setting the Day/Night Mode
(1)
(2)
(3)
(4)
(1) [Auto]
The camera automatically switches to day mode or
night mode depending on ambient brightness.
(2) [Day Mode]
Color image can be viewed in the normal mode.
(3) [Night Mode]
Images are shown in black and white, due to the
disabling of the infrared cut filter.
(4) [Day/Night Mode Focus Settings]
Click to display the [Day/Night Mode Focus Settings]
panel for making focus settings when switching Day/
Night Mode. Can only be set when [Focus] is set to
[Manual] (p. 146).
(5)
(6)
(7)