Vehicle Maintenance; Chassis Service & Maintenance; Engine Access; Engine Cooling System - Winnebago 2016 Adventurer Owner's Manual

Table of Contents

Door locks and hinges should be lubricated periodically with powdered graphite to ensure trouble-free

operation and to protect against freeze-up.

VEHICLE MAINTENANCE

(See also Safety Precautions, Section 1 of this manual).

Chassis Service & Maintenance

Consult the appropriate sections in your chassis-operating guide for specific information regarding operating

safety, service recommendations and maintenance schedules for the chassis section of your motor home.

Refer to your chassis-operating guide.

Refer to your chassis-operating guide for information and precautions on filling, servicing and checking the

fluid level.

When refilling the coolant system of a vehicle equipped with a rear auxiliary automotive heater and

motor aid water heater, be sure to allow for additional coolant capacity of the heater and its supply

and return hoses.

Low air pressure results in tire overloading and abnormal wear and also affects handling and fuel economy.

Obtain proper inflation pressures from your chassis operating guide or tire manufacturer.

Make sure all replacement tires are of the same size and ply rating as those installed as original

equipment.

The front suspension and steering system of this vehicle was factory aligned using highly accurate equipment

prior to delivery to the dealership. However, we recommend that alignment be checked and adjusted, if

necessary, after you have fully loaded the motor home according to your personal needs. Thereafter, the

alignment should be periodically inspected to help prevent uneven tire wear.

Any excessive or abnormal tire wear may indicate worn or misaligned suspension or steering, unbalanced tire

or other tire/suspension problem.

CAUTION

WARNING

Table of Contents