Related Documentation - AudioCodes MP-11x Hardware Installation Manual

Related Documentation

SIP Release Notes
MP-11x & MP-124 SIP User's Manual
MP-124 AC SIP Fast Track Guide
MP-124 DC SIP Fast Track Guide
MP-11x SIP Fast Track Guide
CPE Configuration Guide for IP Voice Mail
Notes and Warnings
Note:
Note:
Notes:
Do not open or disassemble this device. The device carries high voltage and
contact with internal components may expose you to electrical shock and
bodily harm.
Warning:
Warning:
Hardware Installation Manual
Document Name
MP-11x devices are indoor units and therefore, must be installed only
INDOORS. In addition, FXS and Ethernet port interface cabling must be
routed only indoors and must not exit the building.
MP-124 devices are indoor units and therefore, must be installed only
INDOORS. The MP-124 FXS telephony cables can be routed outdoors. In
such a case, power surge protection means are required. The Ethernet port
interface cabling must be routed only indoors and must not exit the building.
Throughout this manual and unless otherwise specified, the following terms
are used:
• Device refers to the MediaPack series gateways.
• MediaPack refers to MP-112, MP-114, MP-118, and MP-124.
• MP-11x refers to MP-112, MP-114, and MP-118.
Caution Electrical Shock
The device is supplied as a sealed unit and must only be serviced by
qualified service personnel.
Disconnect the device from the mains and Telephone Network Voltage
(TNV) before servicing.
6
MediaPack Series
Document #: LTRT-59819