Connecting Fxs Interfaces Using Audiocodes' Mp-124 Patch Panel; Figure 3-11: Connecting Patch Panel To Mp-124 - AudioCodes MP-11x Hardware Installation Manual
Mediapack series analog voip gateways
Hide thumbs
Also See for MP-11x:
- User manual (650 pages) ,
- Configuration manual (42 pages) ,
- Release notes (178 pages)
Table of Contents
Advertisement
Hardware Installation Manual
3.4.3.1
Connecting FXS Interfaces using AudioCodes' MP-124 Patch Panel
If you have purchased AudioCodes MP-124 Patch Panel, follow the instructions below for
connecting the FXS analog equipment to the device through the Patch Panel.
Note:
To connect MP-124 to FXS interfaces using MP-124 Patch Panel:
1.
Mount the Patch Panel in a 19-inch rack, using the integrated mounting brackets on
either side of the unit.
2.
Insert and fasten the Patch Panel's 50-pin male connector to the 50-pin female Telco
connector on the MP-124 rear panel (labeled Analog FXS Lines 1-24):
Version 6.6
The LEDs on the Patch Panel front panel are disabled.
Figure 3-11: Connecting Patch Panel to MP-124
3. MP-124 Hardware Installation
37
MP-11x & MP-124
Advertisement
Table of Contents
