Related Manuals for Vision SP-1400P
Summary of Contents for Vision SP-1400P
-
Page 1: Owners Manual
SP-1400P POWERED SPEAKERS OWNERS MANUAL www.visionaudiovisual.com/techaudio/sp-1400p SP-1400P_manual_en... -
Page 2: Declaration Of Conformity
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. All products are designed and imported into the EU by ‘Vision’ who is wholly owned by ‘Azlan Logistics Ltd.’, Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park, Clifton Moor, York, YO30 4GH. -
Page 3: Place Of Installation
WARNING SIGNS If you detect an abnormal smell or smoke, turn this product off immediately and unplug the power cord. Contact your reseller or Vision. PACKAGING Save all packing material. It is essential for shipping in the event the unit ever needs repair. -
Page 4: Installation
INSTALLATION FIT BRACKETS TO WALL Position brackets over load-bearing studs and use appropriate screws to fix brackets to wall. Ensure they are level. NOTE: Do not position the top of bracket closer than 140mm to ceiling. FIT LOUDSPEAKERS TO MOUNTS Lower loudspeakers onto brackets as shown. SP-1400P_manual_en... - Page 5 CONNECT LOUDSPEAKERS TOGETHER Use the included speaker cable as shown on previous page. If cable provided is not long enough use unshielded speaker cable with gauge of 0.75mm or higher. CONNECT INPUTS To the minijack and/or phono connectors on the rear panel. Input connectors Figure-8 (C7) Power Socket CONNECT POWER Connect C7 (figure-8) power into rear of master loudspeaker.
- Page 6 TIGHTEN BRACKET SCREWS Set desired angle and lock off side screws. SP-1400P_manual_en...
-
Page 7: Operation
SWITCH INPUTS Short-press the volume dial to change input. TONE CONTROL The remote control can be used to adjust the tone control and all of the other functions above. Note: Vision use one remote for all products so some buttons will not work with this product. SP-1400P_manual_en... -
Page 8: Troubleshooting
TROUBLESHOOTING If your system is not operating properly, please refer to the following information. If the problem persists, disconnect from power and contact your AV reseller immediately. Problem Correction No power light Press volume control. Check power source and power input cable. Check fuse in power cable plug. -
Page 9: Specifications
SPECIFICATIONS PRODUCT DIMENSIONS: 185 x 148 x 250 mm (length x width x height for each speaker) PRODUCT WEIGHT: 4.1 kg / 9.0lb (per pair) CONSTRUCTION MATERIAL: MDF COLOUR: White TECHNICAL DETAILS: Amplifier Output: 2 x 30w watts (RMS) Woofer: 4″ Tweeter: 1.5″... -
Page 10: Warranty
WARRANTY This product comes with a 2-year return to base warranty, effective from the date of purchase. This warranty applies only to the original purchaser and is not transferable. For the avoidance of doubt, this will be taken from the information held by the appointed national distributor at the point of sale.
Need help?
Do you have a question about the SP-1400P and is the answer not in the manual?
Questions and answers