Table of Contents
Advertisement
5. Advanced operation
4. Select OSD Ver. Pos.
The command bar OSD Ver. Pos. is highlighted.
5. Set the OSD vertical position as desired and confirm.
5.4.4.3
OSD Time-out
About OSD time-out
The available OSD time-out values for your display are:
•
10 Sec.
•
20 Sec.
•
30 Sec.
•
60 Sec.
•
Disabled (=5 minutes)
To adjust the OSD time-out
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the OSD setting submenu.
4. Select OSD Time-out
5. Select one of the available OSD time-out values and confirm.
5.4.5
Recall Profile
About recalling profiles
To recall a profile means to restore the default factory settings (Factory and X Ray profiles) or recall the
use defined profiles.
The available profiles to recall from your display are:
•
Factory
•
X Ray
•
User 1
•
User 2
•
User 3
To recall a profile
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Recall Profile submenu.
4. Select one of the available profiles to recall and confirm.
5.4.6
Save Profile
About saving profiles
The user can modify the default video parameters associated to each profile and save the new parameters
setting under the User 1, User 2 or User 3 profile. The Factory and X Ray profiles can be modified, but
the factory default can't be overwritten and can always be recalled through the recall profile menu item.
The available profiles to save in your display are:
36
(451920611333)K5903030 MDSC-2242 09/10/2014
Advertisement
Table of Contents
