Connector Pin Assignments; Dvi-1 Connector (Dvi-I) - Barco MDSC-2242 User Manual

2.5

Connector pin assignments

2.5.1 DVI–1 connector (DVI-I)
Overview
Image 2-6
Pin Function
1 D2_Rx- (T.M.D.S.)
2 D2_Rx+ (T.M.D.S.)
3 GND (data 2 shield)
4 Not connected
5 Not connected
6 SCL (for DDC)
7 SDA (for DDC)
8 Analog vertical sync
9 D1_Rx- (T.M.D.S.)
10 D1_Rx+ (T.M.D.S.)
11
GND (data 1 shield)
12 Not connected
13 Not connected
14 +5V input (DDC supply) (*)
15 GND (cable sense)
16
Hot plug detect (*)
17 D0_Rx- (T.M.D.S.)
18 D0_Rx+ (T.M.D.S.)
19 GND (data 0 shield)
20 Not connected
21 Not connected
22 GND (clock shield)
23 CK_Rx+ (T.M.D.S.)
24 CK_Rx- (T.M.D.S.)
Analog Red
C1
C2 Analog Green
C3 Analog Blue
Analog horizontal sync
C4
C5 Analog GND return (analog R, G, B)
(*) +5 VDC output selectable on either pin 14 or 16 via the OSD menu. (+5V ± 10% @ 500mA (max))
PC analog (VGA) input source can be connected to the DVI-I input connector using a
DVI-I to VGA adapter. The use of an adapter cable of at least 0.15 m long will allow an
easy placement inside the cable cover.
(451920611333)K5903030 MDSC-2242 09/10/2014
2. Parts, controls and connectors
9