Table of Contents
Advertisement
4. Select one of the available main source and confirm.
Note: If you selected the Auto Search preset, the display will automatically detect the connected signal.
5.3.2
Component Mode
About component modes
The available component modes for your display are:
•
YPbPr
•
RGB
To select the component mode
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the Component Mode submenu.
4. Select one of the available component modes and confirm.
5.3.3
Zoom
About zoom
The available zoom factors for your display are:
•
None
•
10%
•
20%
•
30%
•
40%
•
50%
The zoom factor can also be selected through a shortkey function.
To select a zoom factor
1. Bring up the OSD main menu.
2. Navigate to the Display Format menu.
3. Enter the Zoom submenu.
4. Select one of the available zoom factors and confirm.
5.3.4
Image Size
About image size
The available image sizes for your display are:
•
Full Screen (fill the screen, image aspect-ratio can be altered)
•
Aspect (fill the screen on largest dimension, no modification in image aspect-ratio)
•
Native (input pixel to LCD pixel mapping, no scaling)
(451920611333)K5903030 MDSC-2242 09/10/2014
5. Advanced operation
31
Advertisement
Table of Contents
