Table of Contents
Advertisement
3. Display installation
W
ARNING
holes are closed (e.g. using the screws provided with the display).
3.2
Video input connection
W
ARNING
tion of all cables, to avoid unwanted detachment.
About video input connections
The MDSC-2242 can have multiple different video inputs connected (depending on the display version).
Switching between the different inputs can be easily done by pressing the direct access key for this. See
the dedicated section for more info.
Futhermore, if more than one video source is connected, the Picture in Picture (PiP) and Side-by-Side
(SbS) functionality becomes available, allowing you to view two different video inputs at once. Please
refer to the dedicated chapter for more info on how to activate and use the PiP and SbS features on your
MDSC-2242.
This chapter describes how to connect the different video input types for each version of the MDSC-2242.
3.2.1
MDSC-2242 LED version
To connect the video inputs
1. Connect one or more of the available video source(s) to the corresponding video inputs using the ap-
propriate video cable(s).
Image 3-2
DVI or VGA (*)
DisplayPort
SDI
R/G/B/S
R/G/B (SOG)
Y/Pb/Pr
14
:
The IP protection rating of the display is guaranteed only if the 12 VESA
:
When the display is assembled in the medical system, take care of the fixa-
4
5
1
6
7
8
/
/
/
6
7
8
/
/
7
8
6
/
/
2
(451920611333)K5903030 MDSC-2242 09/10/2014
2
3
4
5
6
7
8
9
Advertisement
Table of Contents
