Table of Contents
Advertisement
4. Daily operation
4.5.3
Zoom factor selection
To quickly select the zoom factor
1. Use the Image zoom key ( ) to select one of the available zoom factors.
4.5.4
Brightness adjustment
To quickly adjust the brightness
1. While no OSD Menu is on the screen, press the Brightness decrease ( ) or Brightness increase ( )
keys to adjust the brightness as desired.
Brightness
Image 4-4
4.6
Keyboard locking/unlocking
To lock/unlock the keyboard
The keyboard can be locked from the Menu to avoid unwanted access to OSD functions. When the key-
board is LOCKED only the OSD Menu key ( ) and the Stand-by key ( ) are active. When the Menu OSD
key is pressed the Keyboard Locked window appears.
1. To unlock the keyboard the following sequence of keys need to be pressed:
,
,
,
Each time a key is pressed an asterisk is shown in the square boxes.
After pressing the fourth key, if the sequence is correct, the main OSD menu is activated. To unlock the
keyboard permanently the specific OSD function is required.
Keyboard lock
Sequence: 5 - 6 - 6 - 3
Image 4-5
4.7
Remote control
About the remote control
The Barco remote control operates on an infrared (IR)-based transmitter. If it has an unobstructed line-of-
sight to the receiver, the Barco remote control can function at distances of up to 30 feet (about 9 meters).
The remote control duplicates the functions of the keyboard.
22
50
(451920611333)K5903030 MDSC-2242 09/10/2014
Advertisement
Table of Contents
