Date & Time - Ganz PixelPro GXi Series User Manual

PixelPro GXi Series Web Page User's Manual V1.8.0.8
5.8.2. Date & Time
Time setting is very significant for all parts of the product server because it affects the log of
streaming and burnt-in text of video. To configure the date and time, go to Setup >
Maintenance or Basic Configuration > Date & Time .
Current Camera/Encoder Time
It shows the camera's recognized time.
Configuration
Time zone
Select the proper time zone of where the camera is installed from the drop-down box. Daylight
saving time applies automatically.
Sync source
The camera/encoder is synchronized with the Real-time clock by default whenever the
camera/encoder reboots once or when the system time is twelve at night if 24-Hour option is
on. If NTP server is selected, the system time will be synchronized with the predefined the NTP
server.
Real time clock on system – Time setting relies on the Real-time clock which is inside the
camera. The clock chip is attached as internal part of the product, and it is recharged
automatically when the device is powered.
NTP server – Time setting relies on designated NTP server. Users can configure available NTP
servers at Setup > Network Configuration > NTP. Four NTP server lists can be added, and the
first top list is the default source of the time (time.windows.com).
Date and time format
Select the desired date and time format from the drop-down list box.
09-2014-A 85