Maintenance; Users - Ganz PixelPro GXi Series User Manual

PixelPro GXi Series

5.8. Maintenance

5.8.1. Users

To create/remove/modify a user group, go to Setup > Basic Configuration > Users.
How to add a user
To add a user for the webpage,
1. Go to Setup > Basic Configuration > Users.
2. Click Add below the User List.
3. When the pop-up window appears, type a user name and password.
Limitation on user name
The user name can consist of alphabets from "a" through "z", numbers from 0 to 9, and
underscore symbol; the user name must begin with an alphabet letter.
Length: The length of user name must be between 4 and 32.
Character range: All upper or lower case letters, numbers from 0 to 9, and underscore
Limitation on password
A password can contain from 4 to 32 characters with a combination of English alphabet and
numbers.
Length: The length of password must be between 4 and 32.
Character range: All upper or lower case letters and numbers from 0 to 9
i
The maximum length of password varies depending on the firmware version.
The version lower than1.7.0.7 has the password of eight characters.
Note
4. Select a User Group for the new added user.
Viewer/Operator
The users with Viewer/Operator privilege can only access Live Page.
5. Click Apply to save the changes.
6. Check if the user name is added to the User list.
09-2014-A
Web Page User's Manual V1.8.0.8
83