5-2. Programming item descriptors
5-2-1
Programming PLU item descriptors
Operation: <PGM2> → 1.Item Descriptor → 1.PLU → Select item †
5-2-2
Programming PLU 2nd unit price descriptors
Operation: <PGM2> → 1.Item Descriptor → 2.PLU 2nd@ → Select item †
† Item selection: There are 4 methods to select items.
1. Select by cursor.
2. Press the appropriate PLU key directly.
3. Designate PLU record No. or random No.
4. Using character search: You can search an item by its name.
Press <. (decimal point)> key, enter a few characters and press the <ENTER> key.
The terminal searches the item begins with these characters.
After character search, press <UP ARROW> / <DOWN ARROW> shows the next/previous candidate.
5-2-3
Programming subdepartment descriptors
Operation: <PGM2> → 1.Item Descriptor → 3.Sub-Department → Select item
QT-6600 Programming Manual
——— 0 ~ 24 characters
When you press the <Yes> key, the character programming
keyboard (refer to the page P-126) is opened.
a. You can enter the character programmed to the PLU file
(character on receipt).
b. If the item is linked to the keyboard or a list, the character
(actual keytop character and keytop character in a list
window) can be set after step-a.
——— 0 ~ 24 characters
You can enter the character programmed to the PLU 2nd @
file (item name on receipt).
——— 0 ~ 16 characters
When you press the <Yes> key, the character programming
keyboard (refer to the page P-126) is opened.
a. You can enter the character programmed to the subde-
partment file (character on receipt).
b. If the item is linked to the keyboard or a list, the character
(actual keytop character and keytop character in a list
window) can be set after step-a.
P-129