Programming The Machine Control 2 - Casio QT-6600 Programming Manual

Program 3

4-1-5-2 Programming the machine control 2

Operation: <PGM3> → 1.Machine Feature → 5.General Feature → 2.Machine Control 2
P-36
——— Sequential (Memory No.)/Random PLU No.
——— Sequential (Memory No.)/Department No.
——— Net total includes/excludes add-on and add-in tax.
——— Net total includes/excludes clerk commission.
——— The tax status and commission status of plus/minus
after item registration follows the last item.
——— Affect premium, discount, plus, minus result to the
original item.
——— Only one premium, discount, plus or minus registration
is permitted during one receipt.
——— Rounding on the least significant digit of premium or
discount registration.
——— The least significant digit for monetary amount entry is
restricted to 0 or 5.
——— Money declaration is mandatory/not.
——— ST key operation before finalization is mandatory/not.
——— Allow/prohibit finalization operation when the subtotal
amount is less than zero.
——— Prohibit/allow multiple refund operations after entering
the REF mode.
——— Allow/prohibit post receipt after a normal receipt
issuance.
——— Allow prohibit numeric entries when drawer (compul-
sory drawer only) is opened.
——— Error occurs when actual stock for a registered item
becomes negative.
——— Error occurs when actual stock for a registered item
drops below its programmed optimum stock value.
——— Affect to stock value during RF key and the REF mode
operation.
——— Merge the same item registration of a guest receipt.
——— Money declaration compulsory on inline master termi-
nal.
——— Tip amount is accumulated to the first server. (If "No",
signed on server.)
——— Disable to register the item until the scale has been zero
balanced.
——— Scale format: 2 = Australian format.