Getting started
This section outlines basic features and functions of the JetScan iFX i100 scanner.
Powering ON/OFF
To turn the machine ON, set the rocker switch located in the lower-left rear corner
when facing the front of the machine to the ON position (I). Allow the machine to
complete its power-on sequence. The machine is ready to process documents when
the touch panel displays the main screen.
To turn the machine OFF, ensure the machine is not processing documents, and then
set the rocker switch located on the rear of the machine to the OFF position (O).
High-voltage levels may be present. Risk of electric shock.
Turn power OFF and unplug power cord from machine before
cleaning.
Do not attempt repairs. Repairs must be made by authorized
Cummins Allison personnel.
Use grounded plug and properly grounded outlet.
Read and understand all instructions before use.
Only use Cummins Allison supplied power adapter.
Helv. Bold
Oblique
41.29
Use of any other power adapter may damage equipment.
Getting started | JetScan iFX
®
i100 scanner | 7