Operating Modes - CUMMINS ALLISON JetScan iFX i100 User Manual

Operating modes
Pressing MODE from the main screen displays all modes that have been enabled in
SETUP and are available for use. The following screen shows all modes enabled. Each
mode is described in the table.
Mode key
STRANGER
MIXED
SORT
COUNT
FACE
ORIENTATION
10 | JetScan iFX ® i100 scanner | Getting started
Scans for the first denomination processed, which is the
target, and stops when another denomination is found. When
the machine encounters a different denomination, it is called
a stranger. A grand total is provided.
Scans all denominations without presorting. A grand total by
denomination is provided.
Scans all denominations and stops when a denomination
change occurs. Best used when notes are presorted by
denomination and then stacked together. A grand total is
provided.
Counts any type of media that complies with document size
and density-setting specifications. This mode only counts
pieces; document scanning does not occur.
When FACE is selected in addition to STRANGER, MIXED
or SORT mode, the machine stops when it detects a non-
faced document. The first document processed determines
the facing.
When ORIENTATION is selected in addition to STRANGER,
MIXED or SORT mode, the machine stops when it detects
a non-oriented document. The first document processed
determines the orientation.
Description