CUMMINS ALLISON JetScan iFX i100 User Manual page 22

Condition
Sensors detected a possible
counterfeit note. The machine stopped
with this note as the top note in the
pocket. This note has not been included
in the count.
Action
Inspect the top note in the
pocket. Next there are three options:
• If the note is deemed genuine, return
it to the pocket and press ACCEPT.
The machine restarts, and this note will be added to the count.
• If the note is deemed counterfeit, place it aside and press REJECT. It will not be
included in the count.
• Press REJECT and return the note to the hopper for reprocessing.
SD code
• Incorrect note paper
S-1
• Soiled note
• Incorrect note paper
S-2
• Machine-washed note
• Taped note
• Incorrect note paper
S-3
• Soiled note
• Incorrect-ink error
S-5
• Worn note
• Note failed advanced-
S-8*
counterfeit test
• Worn note
* These error codes are most common among high-quality counterfeits or super notes. Notes
producing these codes should be carefully examined.
S-1 S-2 S-3
Lower probability of a high-quality
counterfeit or super note.
Commonly identifies poor-quality
counterfeit notes.
22 | JetScan iFX ® i100 scanner | Stopping conditions and recovery steps
Possible causes
S-5
SD code Possible causes
• Note failed advanced-
S-9*
counterfeit test
• Worn note
• Incorrect-ink error
S-10*
• Worn note
• Incorrect-ink error
S-11*
• Worn note
• Incorrect-ink error
S-12*
• Worn note
• Incorrect note paper
S-13*
• Worn note
S-8 S-9 S-10
Greater probability of a high-quality
counterfeit or super note.
S-11 S-12 S-13