CUMMINS ALLISON JetScan iFX i100 User Manual page 28

1
Turn power OFF (rocker panel to 0).
2
Release
sleeve
3
Lift adjustable hopper to the upright position.
4
5
Flat, center rubber-drive tire
6
Lift display panel to the upright position.
7
8
28 | JetScan iFX ® i100 scanner | Daily cleaning procedures
Use a dry microfiber towel to clean the black start
sensor at the top, middle of the feeder plate (shown
at left).
Use a Simple Green Safety Towel to clean all
rubber sections of the large, black feed rollers.
Rotate the rollers.
Next, use a Simple Green Safety Towel to clean the
flat, center rubber-drive tire (shown at left).
Push release levers down to disengage the
upper-transport plate.
Lift upper-transport plate to the locked position.
Grasp release sleeve on power-cord
connector. Disconnect power cord
from machine.