Headlight Adjustment - PIAGGIO X7 250ie Service Station Manual

Maintenance

Headlight adjustment

Proceed as follows:
- Position the unloaded vehicle, in running order
and with the tyres inflated to the prescribed pres-
sure, onto a flat surface, 10 m away from a half-lit
white screen; make sure the vehicle axis is per-
pendicular to the screen.
- Turn on the headlight and check that the border-
line of the projected light beam should be lower
than 9/10 of the distance from the ground to the
centre of the vehicle's headlight, and higher than
7/10.
- Otherwise, adjust the headlight.
N.B.
THE ABOVE PROCEDURE COMPLIES WITH
THE EUROPEAN STANDARDS REGARDING
MAXIMUM AND MINIMUM HEIGHT OF LIGHT
BEAMS. REFER TO THE STATUTORY REGU-
LATIONS IN FORCE IN EVERY COUNTRY
WHERE THE vehicle IS USED.
In order to adjust the light beams:
- Remove the PIAGGIO clip-on badge and undo
the screw «A».
- Working on both sides of the vehicle, undo the
screw «B» and remove the front headlight cover.
MAIN - 14
X7 250ie