PIAGGIO X7 250ie Service Station Manual page 43

X7 250ie
Maintenance
- Remove the windshield.
- Undo the screw «B» and remove the front han-
dlebar cover «C» partially.
- Remove the cap «E» by loosening the two
screws «D» and restore the fluid level by adding
prescribed fluid type only, without exceeding the
maximum level.
This operation applies to top up the rear brake
pump. Follow the same procedure for the front
one.
WARNING
ONLY USE DOT 4 CLASS BRAKE FLUIDS.
COOLING SYSTEM FLUIDS ARE HIGHLY COR-
ROSIVE. MAKE SURE THAT IT DOES NOT
COME INTO CONTACT WITH THE PAINT-
WORK.
CAUTION
AVOID CONTACT OF BRAKE FLUID WITH
EYES, SKIN, AND CLOTHING. IN CASE OF
CONTACT, RINSE WITH WATER. THE BRAK-
ING CIRCUIT FLUID IS HYGROSCOPIC, THAT
IS, IT ABSORBS HUMIDITY FROM THE SUR-
ROUNDING AIR. IF THE HUMIDITY IN THE
BRAKING FLUID EXCEEDS A CERTAIN VAL-
UE, IT WILL LEAD TO INEFFICIENT BRAKING.
NEVER USE BRAKING FLUID KEPT IN CON-
TAINERS THAT HAVE ALREADY BEEN
OPENED, OR PARTIALLY USED.
Recommended products
AGIP BRAKE 4 Brake fluid
FMVSS DOT4 Synthetic fluid
MAIN - 13