Forwarding Calls - Polycom SoundPoint IP 650 User Manual

Hide thumbs Also See for SoundPoint IP 650:

Table of Contents

User Guide SoundPoint IP 650

Forwarding Calls

Note

3 - 14

— Press

and

At this point, the call is connected to the number to which you are

transferring them.

You can configure your phone so that all incoming calls are forwarded to

another party (known as static forwarding). You can also forward calls while

the phone is ringing (known as dynamic forwarding).

All incoming calls can be forwarded to another party while Do Not Disturb is

enabled on your phone. For more information, contact your system

administrator.

Call Forwarding is not available on shared lines.

This feature is local to the phone, and may be overridden by call server settings.

For more information, contact your system administrator.

Static Forwarding

To enable call forwarding to another party:

1. Do one of the following steps:

— Press

— Press the Forward soft key from the idle display.

2. (Optional) If multiple lines are configured on your phone, select the line

to forward from the list using

, select Call Lists, select the appropriate list, use

to access the number, and then select the Dial soft key.

and select Features > Forward...

and

Table of Contents

Do you have a question about the SoundPoint IP 650 and is the answer not in the manual?