Getting Started; Smartstart; Inserting/Replacing The Battery - ReSound BE70 User Manual

Getting started

On/Off function
1. When the battery door is closed, the hearing instrument turns on, and the default programme will be
activ ated.
2. To turn off the hearing instrument, open the battery door. Many individuals can use their fingernail to
pull it open.

SmartStart

Hearing instruments can be turned on once you have placed them on
your ears. If you prefer to turn them on just prior to placing them on your
ear, your hearing care professional can activate a function called Smart-
Start. This function will delay the time in which the hearing instruments
turn on after the battery compartment is closed. With SmartStart, a beep
will be heard for each second of the delay period.
12

Inserting/Replacing the battery

1. Open the battery door completely by using your
fingernail. Remove the used battery if present.
2. Prepare the new battery (please refer to page 6 for
information on appropriate battery type/size for your
hearing instrument). Remove the protective foil and
wait 2 minutes before inserting the battery into the
hearing instrument to allow activation of the battery.
3. Insert the new battery with the positive side in the
On
correct position.
4. Gently close the battery door.
i
Tip:
Off
1. Always use new Zinc-Air batteries that have a minimum remaining shelf life of 1 year.
2. Whenever the hearing instruments are not in use, remember to turn them off to avoid unnecessary
battery consumption.
3. Remove the sticker from the battery and let it air for 2 minutes before you insert it.
4. If hearing instrument is experiencing frequent loss of connection to ReSound Unite accessories, contact
your hearing care professional for a list of low impedance batteries.
2
1
3
13