How To Apply Domes; Using Resound Hearing Instruments With Smart Phone Apps - ReSound BE70 User Manual

Note: Thin tube and dome systems should be changed every three months or sooner, should the compo-
nents become stiff or brittle.

How to apply domes

It is recommended that your hearing care professional change domes, as incorrect dome replacement
could result in the dome falling out in the ear.
ReSound Standard domes
1. Push the new dome over the ribs on the thin tube.
2. Make sure that the new dome is properly and securely mounted.
1
ReSound Tulip domes
Tulip domes are mounted in a similar manner to standard domes, but a few extra steps are required. Tulip
domes consist of two "petals". It is important to note that the largest petal is the outermost petal. To ensure
this:
32
2

Using ReSound hearing instruments with smart phone apps

i
Intended use of smart phone apps:
GN ReSound smart phone apps are intended to be used with GN ReSound wireless hearing aids. GN Re-
Sound smart phone apps send and receive signals from the GN ReSound wireless hearing aids via smart
phones for which the apps have been developed.
Use with smart phone apps:
• Notifications of app updates should not be disabled, and it is recommended that the user installs all
updates to ensure that the app will function correctly and will be kept up to date.
• The app must only be used with GN ReSound devices for which it is intended, and GN ReSound take
no responsibility if the app is used with other devices.
• If you would like a printed version of the user guide for a smart phone app please consult customer sup-
port or our website to obtain a printed user guide.
1. Push the largest petal away from
the thin tube using a finger. This bends the
petal forward.
2. Then push the largest petal back,
and it will be placed on top of the smaller
petal.
33