Getting Started - Installation - ReSound Airlink 2 User Manual

Getting started - Installation

Airlink 2 is a USB plug and play programming interface enabling you to wireless fit hearing Instruments
from ReSound, Beltone and Interton.
1) Before you connect Airlink 2 make sure that you have the appropriate fitting software installed. The
Airlink 2 driver is installed during fitting software installation.
• Airlink 2 is supported by ReSound Aventa 3.6 (or later).
• Airlink 2 is supported by Beltone Solus Pro 1.6 (or later).
• Airlink 2 is supported by Interton Appraise 2.2 (or later).
2) After successful fitting software installation attach Airlink 2 to any USB port on the PC using the supplied
USB cable.
4