Field Separator (Gs Character); Gs1 Formatting - CipherLab 1660 User Manual

1660/1661 Barcode Scanner

4.16.5 FIELD SEPARATOR (GS CHARACTER)

Decide whether to apply a field separator (to convert the GS control character to human
readable character).
1) Read the barcode above to specify field separator.
2) Read the "Hexadecimal
3) Read the "Validate" barcode to complete this setting.

4.16.6 GS1 FORMATTING

Decide whether to enable GS1 formatting for GS1 DataBar (RSS family). When enabled,
the field separator and application ID mark characters will be automatically added to the
output data.
You may want to add an application ID mark (1 character long) to the left (AIMark1) or
right (AIMark2) of an application ID (AI) for the purpose of labeling it when formatting
the GS1 data.
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
2) Read the "Hexadecimal
'00' if you want to remove the AI mark.
3) Read the "Validate" barcode to complete this setting.
148
User Guide
Value" barcode on page 228 for the desired character string.
Value" barcode on page 228 for the desired character. Read
Specify Field
Separator...
Enable
*Disable
AIMark1
AIMark2
Enter Setup