CipherLab 1660 User Manual page 24

1660/1661 Barcode Scanner
Working Mode
Upon powering up, the scanner will try to establish a connection with 3610 or a computer with
®
Bluetooth wireless technology. Refer to
The connection between the scanners and 3610 is made easy and reliable. Now, it also supports
BT SPP Master Mode as an alternative. Refer to
Note: If USB Virtual COM or BT SPP is selected for output interface, the host can directly
send serial
HyperTerminal.exe and type the 6-digit command located under each setup
barcode. Refer to
10
User Guide
Chapter 3 – Setting up a WPAN Connection
commands to configure
Appendix II Host Serial
2.3 BT SPP Master.
the scanner.
Commands.
Enter Setup
for details.
For example, run