CipherLab 1660 User Manual page 36

1660/1661 Barcode Scanner
Delete the last collected data when in memory mode ...
Press the [Power/Delete] key. The scanner will respond with two short beeps (high tone) and the
LED will become solid red. Before the LED goes off (within 1 second), press the [Power/Delete] key
again to confirm the deletion.
Enable/Disable the [Delete] key function
Scan the barcode below to enable/disable the [Delete] key. By default, users can press the
[Power/Delete] key to delete data. If the function is disabled, pressing the key to delete data is not
allowed.
22
User Guide
*Enable
Disable
Enter Setup