Options; 5V On Com1; 5V On Com2; Touch Screen Disable - Honeywell THOR VM2 Reference Manual

Options

Start > Control Panel > Options (Classic view)

5V on COM1

By default, Pin 9 of COM1 provides +5V, such as for an external scanner tethered to the COM1 Port. Uncheck this box to
configure Pin 9 of COM1 to provide RI.

5V on COM2

By default, Pin 9 of COM2 provides +5V, such as for an external scanner tethered to the COM2 Port. Uncheck this box to
configure Pin 9 of COM2 to provide RI.

Touch Screen Disable

By default, this option is unchecked and the touch screen is enabled. If this option is checked, it may be necessary to attach an
external keyboard or USB mouse to access this screen to re-enable the touch screen unless a
assigned to enable the touch screen.
Note: Tapping Apply disables the touch screen but does not dismiss this panel. The panel must be dismissed via an
external keyboard or mouse. This panel is dismissed when the OK button is tapped after selecting Touch Screen
Disable.

Keyboard Backlight

By default, the integrated keyboard backlight follows the display backlight. Uncheck this box to turn the keyboard backlight off
regardless of the display backlight status.

USB Powered in Standby

By default, power is removed from attached USB devices when the Thor VM2 is in Standby mode. Check this box to maintain
power to attached USB devices in Standby.
Programmable Key has been
3-24