Launchapp Tab - Honeywell THOR VM2 Reference Manual

LaunchApp Tab

The default for all text boxes is Null or " ". The text boxes accept string values only.
The executables and parameters are not checked for accuracy by the keyboard driver. If the launch fails, the Thor VM2
displays a popup error message. If the launch is successful, no notification is displayed.
The Launch App command is defined for use by system administrators. These instructions are parsed and executed directly by
the keyboard driver.
1. Place the cursor in the text box next to the App you wish to run, e.g., App1, App2.
2. Enable the app radio button if the application is an EXE file.
3. Enter the name of the executable file.
4. Enable the opt radio button to add options or parameters for the executable file in the same text box. Switching from
app to opt clears the text box (but the information previously entered is stored), allowing parameter entry.
Tap the OK button to save changes and exit the Programmable Keys control panel.
Tap the Cancel button to discard any changes and exit the Programmable Keys control panel.
Tap the Restore Defaults to return all Programmable Keys to their
panel.
The result of the application (app) and options (opt) entries are displayed on the KeyMap tab in the Key Sequence box when
the key mapped to the LauchApp is selected.
default values and exit the Programmable Keys control
3-39