External Keyboard - Honeywell THOR VM2 Reference Manual

External Keyboard

The key map table that follows lists the commands used for the Thor VM2. Note that since the Thor VM2 uses a Microsoft
Windows CE operating system, no DOS Terminal Emulation keypress sequences are provided.
There are 10 hidden keys on the 95 key keyboard. Each of the hidden keys is accessed by pressing the <Fn> key (located in
the top right hand corner) plus a key on the numeric keypad on the right. Additional function keys are supported as well.
To get this Key / Function
Insert
Home
Page Up
Delete
End
Page Down
Up Arrow
Left Arrow
Down Arrow
Right Arrow
Press These Keys in this Order
FN
FN
FN
FN
FN
FN
FN
FN
FN
FN
0 (numeric keypad)
7 (numeric keypad)
9 (numeric keypad)
. (numeric keypad)
1 (numeric keypad)
3 (numeric keypad)
8 (numeric keypad)
4 (numeric keypad)
2 (numeric keypad)
6 (numeric keypad)
5-2