About; System Requirements; Supported Languages; Installing Or Upgrading Oneclick Internet - Honeywell THOR VM2 Reference Manual

About

OneClick Internet allows the user to configure the WWAN connection by entering basic setup information. The network
connection (service carrier) can be chosen based on the firmware loaded, GPS tracking can be enabled and SMS messaging
can be configured.
Once configured, OneClick Internet allows the user to connect or disconnect from the mobile network.

System Requirements

OneClick Internet requires:
Gobi 3000 3G Module (preinstalled by Honeywell)
l
Gobi 3000 Driver package (loaded by Honeywell)
l
OneClick Internet for Gobi 3000 is compatible with
Windows Embedded Standard 2009 on the Thor VM2
l

Supported Languages

OneClick Internet supports the following languages:
German, English, Spanish, French, Polish, Russian, Italian, simplified Chinese and traditional Chinese.
Note: This does not mean that the Thor VM2 has been localized for these languages.

Installing or Upgrading OneClick Internet

Note: You must use the Honeywell supplied version of OneClick Internet. Do not change versions unless instructed by your
Honeywell representative.
One Click Internet is pre-installed before the Thor VM2 is shipped.
If you have an installed version of OneClick Internet and need to update to a newer version, you must uninstall the previous
version first by selecting Start | Control Panel and select Add or Remove Programs. Select OneClick Internet and tap
Remove. Follow the on screen instructions.
Note: OneClick Internet does not install the drivers for the Gobi 3000 devices. Device drivers are preloaded.
4-78