GreenWorks GPW 2000 Operator's Manual page 13

2000 psi / 1.2 gpm electric pressure washer

Hide thumbs Also See for GPW 2000:

Table of Contents

ASSEMBLING THE HANdLE

■ Push and hold the push-pin button on the side of the upper handle assembly (1) as you slide the

handle onto the frame (2).

NOTE: Before use, pull the handle up until the lock button snaps through the locking slots to secure the

handle place.

ASSEMBLING THE HIGH PRESSURE HOSE

■ Take one end of the hose off the holder.

■ Turn the crank handle until the hose can be completely removed. Then remove the other end of the

hose from the holder.

■ Connect one end of the hose to the water outlet connector, while the other end to the trigger gun.

(See Figure 6-3.)

Crank Handle

Fig. 6-2

ASSEMBLY

(See Figure 5.)

(1)

(2)

(See Figure 6-1.)

(See Figure 6-2.)

Holders

Fig. 6-1

EN - 13

Fig. 5

Outlet

Connector

High Pressure

Hose

Fig. 6-3

Table of Contents

Show Quick Links

Table of Contents

Troubleshooting