GreenWorks GPW 2000 Operator's Manual page 12

ASSEMBLY
ASSEMBLING THE WHEEL
(See Figure 3.)
■ Insert the axle through the wheel and through the frame.
■ Slide the washer over the axle pass the pin hole.
■ Insert the pin through the hole to firmly fasten the wheel.
Axle
Axle
Pins
Washers
Wheels
Fig. 3
ASSEMBLING THE GUN HOLdER
(See Figure 4.)
■ Line up the screw sleeves with the holes in the upper handle and push through.
■ Insert the screw and turn clockwise with a phillips head screw driver (not included) until the screw is
tight.
Gun Holder
Screws
Fig. 4
EN - 12